sulacom 24-06-2021 16:38:26 (11 months ago) Rated at: 10 Thanks! Necessary thing! melloman 06-01-2021 12:55:19 (16 months ago) the white balance is noticeably worse than Epson scan. There are a lot of settings. This is a plus, but bb … and manually set the hell you want Yak-Edward 19-10-2020 20:51:01 (19 months ago) Rated at: 10 In this version, it became possible to scan double-sided sheets. PROG – SUPER! THANKS to elchupacabra for useful and good deeds! .:MASUKA:. 22-09-2020 18:31:43 (20 months ago) Rated at: 10 I used to ignore this program, and now it revived the ancient scan at work, the last Windows could not give out more than 300-600 dpi, and through this program everything is 2400. I recommend S_V1 05-08-2020 17:40:11 (22 months ago) >> Sopssna all of the above is in the regular MP Navigator utility from Canon, I use it.

That is if it supports your scanner. This program supports a lot of them

Visitor 28-07-2020 22:20:10 (22 months ago) Rated at: 10 Vanyatka6819 30-06-2020 19:27:41 (23 months ago) Sopssna all of the above is in the regular MP Navigator utility from Canon, I use it. Yes, and other manufacturers most likely have analogues, what for these “Swiss knives” of dubious performance? tropo 02-02-2020 22:06:14 (28 months ago) I scan with photoshop. bonussssss 13-01-2020 16:10:33 (28 months ago) Rated at: 9 Once this program helped out, but over time I don’t know what the problem is, the scanner constantly hung with an exclamation mark, you reboot – it can work, or maybe not, but a miracle happened and for a jar of homemade nectar they gave me an HP MFP, which has native firewood , and for the scanner I use NAPS, because it’s free, this one happened and the activation flew off. Well, in general, when there is no firewood, it is quite a good thing! bomz1 10-10-2019 13:09:51 (32 months ago) Well, I would not have tried it at all if it had not been stated.
but in fact the system is extremely rare and no one is compatible
does not check -=DoMiNo=- 07-10-2019 18:53:23 (32 months ago) bomz1 – I just stated a fact)) – which is stated on the offsite .. – and so many applications are still compatible, for example – but many patches no longer work on XP and vice versa. bomz1 07-10-2019 18:12:54 (32 months ago) what is written does not mean that it is compatible. Rather, it means that it should be compatible; the latest version works for me 9 2 25. above, when I start it, it says that it is not an application -=DoMiNo=- 07-10-2019 17:44:28 (32 months ago) bomz1 07-10-2019 17:35:21 (32 months ago) no one puts on xp x64?
the latest versions are not compatible or some library is missing? 1stCheater 28-06-2019 1:41:26 (35 months ago) Rated at: 10 Version 9.6.43 got up without problems. Everything scans as it should. It is immediately not entirely intuitive how many files to scan in one. I also noticed a problem, if you turn on the scanner after starting the program, then in order for it to see it again, you have to close the program, turn off the scanner, turn on the scanner and wait for it to be fully ready and only then start the program. Otherwise, a window constantly hangs that the scanner is not detected. But it’s possible that this is just my jamb due to compatibility Luxeon. 15-05-2019 19:26:30 (36 months ago) Rated at: 10 how to enable russian? DT29 19-04-2019 18:28:53 (37 months ago) It was necessary to scan a document, in color, in PDF… The first pages turned out to be in color, but the next ones, with the same settings, turned out to be black and white! Changing the color settings didn’t work! Again, the same pages came out in black and white! Other programs quietly scanned in color, in PDF! Does anyone know what the problem was with this program? nick-101in 04-04-2019 09:19:35 (38 months ago) Rated at: 10 Thank you! TAICUS 18-02-2019 15:04:00 (39 months ago) Rated at: 10 Thanks!!!!! Edpara 07-01-2019 13:15:53 (41 months ago) Rated at: 10 Thanks!!! Everything is working.
Only in earlier versions was it possible to process and view all pages of a scanned multipage document before saving the file. Now it shows and makes it possible to process only the last page. Is this really true or do I have to fiddle with the settings somewhere? vladosssk 04-05-2018 17:07:59 (49 months ago) Rated at: 10 Works without problems Win10/64 Gron 23-12-2017 14:21:26 (53 months ago) … Further Generate did not find. The program is not registered. dushatv 04-10-2017 19:44:22 (56 months ago) From administrator it works fine. Is there a way to run it with user rights? Both the installed and portable versions ask for an admin password at startup. bomz1 04-10-2017 03:49:19 (56 months ago) does not work on xp x64 πŸ™ Joseph Visarionovich 06-08-2017 16:48:14 (58 months ago) Rated at: 10 THANK YOU! works! but still branded from epson was better Morfu1986 08-07-2017 14:22:28 (59 months ago) Rated at: 9 I confirm that activation with the Internet also works. I opened the program with admin rights and entered my email into the serial, generated it, entered it into the program ok and closed the program. I open it and it works nikt 24-04-2017 19:14:12 (61 months ago) Rated at: 10 I couldn’t find a driver for an old scanner… I woke up with this program! Successful activation according to instructions! Thank you. Just_Warrior 21-01-2017 12:45:44 (65 months ago) Rated at: 10 For those whose treatment does not work, after you have entered the keys from the keygen, close the program and then open it again, as a result, everything is in order, the activated professional version in the about window and printing without inscriptions (the Internet did not turn off, windows 10). -=DoMiNo=- 16-11-2016 18:49:30 (67 months ago)
Quote

Someone wrote:
Damn, I’ve been looking for this program for a year now. Registration flies when the Internet is connected. The solution is to run with the network off. That’s the only way it works. Otherwise – reinstall with registry cleaning

helix 16-11-2016 18:39:46 (67 months ago) I also don’t recoil. I do according to instructions. Patch-keygen-I enter data-writes OK, registered. I look in Aboute … there is “unregistered”. I restart the program, again asks to activate. I did it with the Internet turned off and turned on, and on XP and on 10. Monopenisually. FSergeyM 17-03-2016 0:17:04 (75 months ago) I like the old version of VueScan 9 x64 (9.1.20), everything is simple and clear, there are a lot of settings. i1780 24-10-2015 23:42:06 (80 months ago) I will take the Canon CanoScan 9000F Mark II scanner. My first scanner. It has its own ScanGear program (scanner driver). If I use VueScan, then I should not install my own Kenon prog at all? Or will they not conflict? Strojar 24-08-2015 19:29:00 (82 months ago) Rated at: 10 Thanks a lot for sharing! I was already thinking about rolling back from Win10 back to the “seven” – Windows does not see my Epson 1270 scanner even crack! And then this VueScan set up its twain driver and away we go, everything works! In the “ten” (official on top of the same official “seven”), everything fell without a tambourine, as in the instructions above. And no, I didn’t turn it off, I found vuescan.exe, patched it and inserted all the data from the keygen – it works! Thanks again MAN! pandorof 04-03-2015 13:51:18 (88 months ago) Rated at: 10 Excellent program. The old BenQ 5560 scanner worked on Win 7X64.
Install with internet disabled.
Go to the control panel, Windows Firewall, click “Advanced Settings” at the bottom left, click “Inbound Rules” at the top left, then click “create rule” at the top right. “- We find on the C: / Program Files / Vuescan / vuescan.exe drive. Click “Next” below, check the box “Block connection”, click “Next”. We see – there should be a check mark (“Domain”, “Private”, “Public “). Click “Next”. Give the name of the action, for example “net ban for vuescan”. Click DONE. It seems like it’s time to rejoice.
We repeat this whole canoe in the Windows Firewall-Only Now for “Outgoing Connections”.
We overload the computer. Quietly turn on the Internet. We rejoice.
Thank the distributor.100. samson450173 12-01-2015 15:13:22 (89 months ago) In general, registration occurs only when the Internet is turned off. But it is worth running it with the Internet turned on, then in the properties again there is a request for code and mail. True, at startup it still writes that “Professional version”. Seytos 17-04-2014 12:26:53 (98 months ago) change email name in keygen and generate codes (name@service.kg) locksmith 03-03-2014 19:13:03 (100 months ago) So I was given an Erase disk? Tsk, tsk πŸ™‚ Tsk, tsk πŸ™‚ egik_nata 02-03-2014 21:46:35 (100 months ago) Rated at: 9 and it writes to me when registering the program (introduced with keygen) Erase disk? Tsk, tsk πŸ™‚ Tsk, tsk πŸ™‚ and here’s what to do..((((( coldmine 23-01-2014 12:10:04 (101 months ago) Rated at: 10 offset program. many settings. There are many such settings that you cannot set in the driver. but here please. and installation does not require, everything works

Leave a Reply

Your email address will not be published.